Pneumatic Conveying
Pneumatic conveying is a technology that transfers solid material from one or several locations to other locations in pipe by use of air flow (normally air). After decades of year’s development, Sino-Auto has developed a complete package of pneumatic conveying technology which is successfully used in industrial field of chemical, food, pharmaceutical and battery.
Product Categories
Suitable for plastic pellets which has fiber content or has higher requirement of particle breakage rate. The material should has good air permeability, good flowability and bulk density less than 0.8g/cm3, and conveying distance shorter than 200m.
★ Based on intelligent ACU, minimizing air consumption, energy saving 20%, reduce 8% of pipe wear and tear, reduce 9% of material damage.
★ Can adapt to a wide range of fluctuations in throughput and conveying distance changes (for example: one point to multipoint feeding, between 20m to 200m).
Suitable for plastic pellets which have fiber content or has higher requirement of particle breakage rate. The material should has good air permeability, good flowability and bulk density less than 0.8g/cm3, and conveying distance shorter than 50m.
Suitable for both powder and pellets which has fine flowability but not abrasive,material transferring from one location to several locations/from several location to one location.
★ Terminal velocity controlled around 18 ~25m/s
★ Conveying distance up to 500m
★ Conveying capacity up to 150t/h
★ 30% energy saving, under controlled at 0.6kwh/t*100m
★ Reduce 30% of dust and streams
★ Reduce 30% of pipe wearing
Suitable for both powder and granulate which has good flowability non-abrasiveness, and has no requirement of particle breakage rate, but is explosive and toxic. Therefore it has to be conveyed by inert gas in a closed loop.
★ Terminal velocity controlled around 18 ~25m/s
★ Conveying distance up to 500m
★ Conveying capacity up to 150t/h
★ 30% energy saving, under controlled at 0.6kwh/t*100m
★ Reduce 30% of dust and streams
★ Reduce 30% of pipe wearing
Related Cases
SABIC Innovative Plastics (Chongqin) Co., Ltd.
Project：2015year， Polycarbonate modified line overall solution
Materials：PC
ShenHua NingXia Coal Industry Group Chemical
Project：2014year，60 kt/a POM powder and pellets conveying system
Materials：POM
Bayer Material Science
Project：2012year，PC/ABS Conveying/blending system
Materials：PC/ABS
Dupont (China) holding Ltd.
Project：2009year，Nylon and POM pellets conveying and batch weighing system
Materials：Nylon and POM
Duracell (China) Limited
Project：2014year，powder processor modular assembly system
Materials：Graphite, Manganese dioxide, Etc,Capacity: 10-20t/h, Conveying distance: 60m, Dense phase conveying, Air velocity: 6.5m³/min,11m³ silo
TEL：+86 20 83553890
